View SP14Q002-C1_5403183.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

for messrs. date. mar.06,2009 customer?s acceptance specifications SP14Q002-C1 c o n t e n t s no. item sheet no. page 1 cover 7b64ps 2701- SP14Q002-C1-9 1-1/1 2 record of revision 7b 64ps 2702- SP14Q002-C1-9 2-1/4~4/4 3 general specification 7b64ps 2703- SP14Q002-C1-9 3-1/1 4 absolute maximum ratings 7b64ps 2704- SP14Q002-C1-9 4-1/1 5 electrical characteristics 7b64ps 2705- SP14Q002-C1-9 5-1/2~2/2 6 optical characteristics 7b 64ps 2706- SP14Q002-C1-9 6-1/2~2/2 7 block diagram 7b64ps 2707- SP14Q002-C1-9 7-1/1 8 interface timing 7b64 ps 2708- SP14Q002-C1-9 8-1/3~3/3 9 outline dimensions 7b63ps 2709- SP14Q002-C1-9 7b64ps 2709- SP14Q002-C1-9 9-1/2 9-2/2 10 quality standard 7b64ps 2710- SP14Q002-C1-9 10-1/3~3/3 11 precaution in design 7b 64ps 2711- SP14Q002-C1-9 11-1/3~3/3 12 designation of lot mark 7b64ps 2712- SP14Q002-C1-9 12-1/1 13 precaution for use 7b64ps 2713- SP14Q002-C1-9 13-1/1 ? when products will be discontinued , customers will be informed by hitachi with twelve months prior announcement. accepted by; proposed by; kaohsiung hitachi electronics co.,ltd p.o. box 26-27 2,13th east st. k.e.p.z. kaohsiung taiwan r.o.c. tel:(07) 821-5811 ( 7 line) fax:(07) 821-5815 kaohsiung hitachi electronics co.,ltd. sh. no. 7b64ps 2701- SP14Q002-C1-9 page 1-1/1 www.datasheet.co.kr datasheet pdf - http://www..net/
record of revision date sheet no. summary 4.2 environmental abso lute maximum ratings operating storage item min. max. min. max. ambient temperature 0 50 note 5 -20 60 revised operating storage item min max min max ambient temperature -20 70 note 5 -30 80 mar.29.02? 7b64ps-2704- SP14Q002-C1-2 page 4-1/1 note 2 ta at 0 < 48h, at 60 < 168h. revised note 2 ta at -30 < 48h, at 80 < 168h. 7b64ps-2704- SP14Q002-C1-3 page 4-1/1 4.2 environmental absolu te maximum ratings added: note 6 operation temp not include cfl lamp. 5.1 electrical characteristics item symbol condition typ. unit ta=0 , ? =0 22.0 v ta=25 , ? =0 21.0 v recommended lc driving voltage note 3 vdd-v0 ta=50 , ? =0 20.0 v revised item symbol condition typ. unit ta=0 , ? =0 (25.0) v ta=25 , ? =0 (24.0) v recommended lc driving voltage note 3 vdd-v0 ta=50 , ? =0 (23.0) v 7b64ps-2704- SP14Q002-C1-3 page 5-1/1 5.2 electrical characteristics of backlight added: note : the half operating life time of backlight. cfl:50,000h(average) apl.19.02? 7b64ps 2706- SP14Q002-C1-3 page 6-1/2 6.1 optical characteristics response(rise) tr:120 (336) response(fall) tf:150 (148) kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2702-SP14Q002-C1-9 page 2-1/4 sh. no. www.datasheet.co.kr datasheet pdf - http://www..net/
record of revision date sheet no. summary 7b64ps-2703- SP14Q002-C1-4 page 3-1/1 (10) back light added : the half brightness life time of backlight cfl : 50,000h(average) 7b64ps-2704- SP14Q002-C1-4 page 4-1/1 4.2 environmental abso lute maximum ratings revised note 2 ta at -30 <48h, at 80 < 168h revised note 2 ta at 0 <48h, at 60 < 168h jul.11,?02 7b64ps 2705- SP14Q002-C1-4 page 5-1/1 5.1 electrical characteristics revised note 4 vdd-v0=(24.0)v (21.0)v 5.2 electrical characteristics of backlight starting discharge voltage min. (1000) 1000 deleted : note the half brightness life time of backlight. cfl : 50,000h(average) kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2702-SP14Q002-C1-9 page 2-2/4 sh. no. item operating storage min. max. min. max. ambient temperature -20 70 note 5 -30 80 item operating storage min. max. min. max. ambient temperature 0 50 note 5 -20 60 item symbol condition typ. unit ta=0 ? = 0 (25.0) v ta=25 ? = 0 (24.0) v recommended lc driving voltage note 3 vdd-v0 ta=50 ? = 0 (23.0) v item symbol condition typ. unit ta=0 ? = 0 22.0 v ta=25 ? = 0 21.0 v recommended lc driving voltage note 3 vdd-v0 ta=50 ? = 0 20.0 v www.datasheet.co.kr datasheet pdf - http://www..net/
record of revision date sheet no. summary jul.11,?02 7b64ps-2706- SP14Q002-C1-4 page 6-1/2 6.1 optical characteristics revised response(rise) tr : (336) 120 response(fall) tf : (148) 150 7b64ps-2703- SP14Q002-C1-5 page 3-1/1 (10).back light type cold cathode fluorescent lamp. the half brightness life time of backlight cfl : 50,000h(average) revised cold cathode fluorescent lamp. cfl life time : 50,000h(average) note : cfl life time = life time for half of cfl brightness. 7b64ps-2709- SP14Q002-C1-5 page 9-1/2 9.1 dimensions outline dimensions express revised 7b64ps-2709- SP14Q002-C1-5 page 9-2/2 9.3 interface pin connection 1.lcm i/f1 revised lcm cn1 2.lcm cfl i/f1 jul.16,?02 7b64ps-2710- SP14Q002-C1-5 page 10-1/3 10.2 definition of each zone b zone : edge line of lcd glass revised b zone : window of metal frame jul.18,?02 7b64ps-2704- SP14Q002-C1-6 page 4-1/1 4.2 environmental absolu te maximum ratings revised note 2 ta at -20 < 48h, at 60 < 168h. revised note 2 ta at -30 < 48h, at 80 < 168h. kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2702-SP14Q002-C1-9 page 2-3/4 sh. no. revised lcm cn2 item operating storage min. max. min. max. ambient temperature 0 50 -20 60 item operating storage min. max. min. max. ambient temperature -20 70 -30 80 www.datasheet.co.kr datasheet pdf - http://www..net/
record of revision date sheet no. summary 7b64ps-2706- SP14Q002-C1-7 page 6-1/2 6.1 optical characteristics revised response time (rise) tr : 120 336 response time (fall) tf : 150 148 feb.25,?04 7b64ps-2708- SP14Q002-C1-7 page 8-3/3 8.3 power on/off timing sequence revised tdld : min. 200 50 tch : max. 200 30 7b64ps2705 SP14Q002-C1-8 page 5-1/2 5.1 electrical characteristics added item symbol min. typ. max power supply voltage logic vdd-vss 3.2 3.3 3.4 21.0 22.0 23.0 20.0 21.0 22.0 recommend lc driving voltage vdd-vo 19.0 20.0 21.0 7b64ps2705 SP14Q002-C1-8 page 5-2/2 5.2 electrical characteristics of backlight canceled note 5:when icfl is used over 5.5 ma ,it may cause uneven contrast near cfl location ,due to heart dispersion from cfl. 7b64ps 2706- SP14Q002-C1-8 page 6-2/2 6.2 optical characteristics of backlight added the lcd driving voltage should be adjusted at the voltage where the peak contrast is obtained. may.14,?04 7b64ps 2710- SP14Q002-C1-8 page 10-1/3 10.1 appearance inspection condition revised 45 ? 25 mar.06,?09 7b64ps2712 SP14Q002-C1-9 page 12-1/1 12. designation of lot mark revised reversion from rev. to rev.b kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2702-SP14Q002-C1-9 page 2-4/4 sh. no. www.datasheet.co.kr datasheet pdf - http://www..net/
3. general specifications (1) part name SP14Q002-C1 (2) module size 167.0(w)mm109.0(h)mm10.0 (d )mm(max.) (3) effective display area 120(w)mm min. 89(h)mm min. (4) dot size 0.345(w)min. 0.345(h)min. (5) dot pitch 0.360(w)mm 0.360(h)mm (6) dot number (resolution) 320 (w) 240 (h) dots (7) duty ratio 1/240 (8) lcd type transmissive type f-stn with glare type upper polarizer (9) viewing direction 6 o?clock (10) back light type cold cathode fluorescent lamp. cfl life time : 50,000h(average) note : cfl life time = life time for half of cfl brightness. kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2703-SP14Q002-C1-9 page 3-1/1 sh. no. www.datasheet.co.kr datasheet pdf - http://www..net/
4. absolute maximum ratings 4.1 electrical absolute maximum ratings vss=0v : standard item symbol min. max. unit comment power supply for logic vdd-vss 0 6.0 v power supply for lc driving vdd-vee 0 27.5 v input signal voltage vi -0.3 vdd+0.3 v note 1 input signal current ii 0 1 a vesd0 - 100 v note 2,3,4 static electricity vesd1 - 10 kv note 2,3,5 note 1 : disp.off , frame , load , cp , d0~d3. note 2 : make certain you are grounded when handling lcm. note 3 : energy storage capacitance 200pf , discharge resistance 250 ta=25 , 60%rh. note 4 : contact discharge to i/f connector pins. note 5 : contact discharge to front metal bezel. 4.2 environmental absolute maximum ratings item operating storage ommnt min. max. min. max. ambient temperature -20 70 -30 80 note 2,3,7 humidity note 1 note 1 without condensation vibration - 2.45m/s 2 (0.25g) - 11.76m/s 2 (1.2g) note 5 note 4 1h max. shock - 29.4m/s 2 (3 g) - 490.0m/s 2 (50 g) note 5 x y z directions corrosive gas not acceptable not acceptable note 1 ta Q 40 : 85%rh max. ta>40 : absolute humidity must be lower than the humidity of 85%rh at 40 note 2 ta at -30 ------< 48h , at 80 < 168h. note 3 background color changes sli ghtly depending on ambient temperature. this phenomenon is reversible. note 4 5hz~100hz (except resonance frequency) note 5 this module should be operat ed normally after finish the test. note 6 when lcm will be operated at 0 , the life time of cfl will be reduced. please make sure that characteristics of the inverter meet the cfl specification. note 7 operation temp not include cfl kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2704-SP14Q002-C1-9 page 4-1/1 sh. no. www.datasheet.co.kr datasheet pdf - http://www..net/
5. electrical characteristics 5.1 electrical characteristics i t e m symbol condition min. typ. max. unit 4.75 5.0 5.25 power supply voltage for logic vdd-vss - 3.2 3.3 3.4 v power supply voltage for lc driving vee-vss - -23.1 -22.0 -20.9 v h level 0.8vdd - vdd v input signal voltage note 1 vi l level 0 - 0.2vdd v power supply current for logic note 1 idd vdd-vss=5.0v vee-vss= -22.0v - 6.0 - ma power supply current for lc driving note 2 iee vdd-vss=5.0v vee-vss= -22.0v - 5.0 - ma ta= 0 , ? = 0 21.0 22.0 23.0 v ta=25 , ? = 0 20.0 21.0 22.0 v recommended lc driving voltage note 3 vdd-v0 ta=50 , ? = 0 19.0 20.0 21.0 v frame frequency note 4 fframe - 70 75 80 hz note 1 disp.off , frame , load , cp , d0~d3. note 2 : flm=75hz , test pattern is all ?q?. vdd-v0=21.0v , ta=25 note 3 : recommended lc driving voltage may fluctuate about 1.0v by each module. test pattern is all ?q? note 4 : please set the frame frequency so as to avoid flicker and rippling on the display. 5.2 electrical characteristics of backlight item symbol min. typ. max. unit note lamp voltage vl - (300) - vrms ta=25 frequency fl - 70 85 khz ta=25 lamp current il 4 5 6 marms ta=25 starting discharge voltage vs 1000 - - vrms ta=25 kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2705-SP14Q002-C1-9 page 5-1/2 sh. no. www.datasheet.co.kr datasheet pdf - http://www..net/
note 1 : please make sure that your inverter is designed to meet the above specifications. note 2 :starting discharge voltage is increased when lcm is operating at lower temperature , please check the c haracteristics of your inverter , so as to ensure discharge at low temperature. note 3 : average life time of cfl will be decreased when lcm is operating at lower temperature. note 4 : lower driving frequency of cfl inve rter may cause mechanical noise of the backlight system . before designing the invert er , please consider the driving frequency of noise. kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2705-SP14Q002-C1-9 page 5-2/2 sh. no. www.datasheet.co.kr datasheet pdf - http://www..net/
6. optical characteristics 6.1 optical characteristics of lcd ta=25 (backlight on) item symbol conditional mi n. typ. max. unit note viewing area ? 2- ? 1 k R 2.0 - 40 - deg 1,2 contrast ratio k ? =0 , ? =0 - 25 - - 3 response time (rise) tr ? =0 , ? =0 - 336 - ms 4 response time (fall) tf ? =0 , ? =0 - 148 - ms 4 note 1. definition of ? and ? note 3. definition of contrast ?k? note 2. definition of viewing angle ? 1 and ? 2. note 4. definition of optical response operating voltage b1 b2 (b1) (di="h") (b2) (di="l") brightness ? =10 x ? ? =180 ) ? ? =0 ) backlight lcd sensor ? =0 ? k 2.0 contrast ratio k vs viewing angle ? ? 1<0 < ? 2 ? 1 ? 2 non-selective state 100% 90% 10% tr tf rise time fall time selective state brightness non-selective state (measure condition by hitachi) brightness on selected dot (b1) brightness on non-selected dot (b2) k= kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2706-SP14Q002-C1-9 page 6-1/2 sh. no. bm7 distance=0.4m www.datasheet.co.kr datasheet pdf - http://www..net/
6.2 optical characteristics of backlight i t e m min. typ. max. unit note brightness - 140 - cd/m 2 il=5ma note 1,2 rise time - 5 - minute il=5ma brightness 80% brightness uniformity - - 30 % note 1,3 cfl : initial, ta=25 display data should be all ?on?. the lcd driving voltage should be adjusted at the voltage where the peak contrast is obtained. note 1 measurement after 10 minutes of cfl operating. note 2 brightness control : 100% note 3 measure of the following 9 places on the display. definition of the brightness tolerance. y=240 y=160 y=80 x=60 x=120 x=180 average brightness max. or min. brightness - average brightness x 100% ( ) kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2706-SP14Q002-C1-9 page 6-2/2 sh. no. www.datasheet.co.kr datasheet pdf - http://www..net/
? do~d3 frame load disp.off cp ic4 320240 dots ic2 ? : timing circuit d0 d1 d2 ic1 x240 d3 x1 x81 x161 x160 x240 x80 x1 ic5 ic6 ic7 power supply cfl vdd vss vo vee vcfl(-) vcfl(+) y320 y241 y160 y81 y80 y1 7. block diagram kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2707-SP14Q002-C1-9 page 7-1/1 sh. no. www.datasheet.co.kr datasheet pdf - http://www..net/
8. interface timing chart 8.1 interface timing chart 52.1 ? s Q t Q 59.5 ? s x1 x2 x240 load cp d3 d2 d1 d0 frame load frame d0~d3 y1 y2 y3 y4 y5 y6 y7 y8 y317 y318 y319 y320 x1 x2 x239 x240 240t kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2708-SP14Q002-C1-9 page 8-1/3 sh. no. www.datasheet.co.kr datasheet pdf - http://www..net/
8.2 timing characteristics item symbol min. typ. max. umit clock frequency fcp - - 6.5 mhz clock pulse width tw 45 - - ns clock rise, fall time tr,tf - - 15 ns data set up time tdsu 30 - - ns data hold time tdhd 30 - - ns load set up time tlsu 80 - - ns load clock time tlc 120 - - ns ?frame? set up time tsetup 100 - - ns ?frame? hold time thold 100 - - ns ?load? pulse width twc 125 - - ns tw tw tw cp tdsu tdhd d0~d3 tlc tlsu load twc tsetup thold frame 0.2vdd 0.8vdd tf tr 0.2vdd 0.8vdd 0.2vdd 0.8vdd 0.2vdd 0.8vdd 0.2vdd 0.8vdd 0.2vdd 0.8vdd 0.2vdd 0.8vdd 0.2vdd 0.8vdd 0.2vdd 0.8vdd 0.2vdd 0.8vdd 0.8vdd 0.8vdd kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2708-SP14Q002-C1-9 page 8-2/3 sh. no. www.datasheet.co.kr datasheet pdf - http://www..net/
8.3 power on/off timing sequence symbol min. max. unit comment tdld 50 - ms tch 0 30 ms (note 1) tldh 0 - ms tdor - 100 ns tdof - 100 ns tdlcr 0 - ms (note 2) tdlcf 0 - ms tdlcs 20 - ms note 1 please keep the specified sequence because wrong sequence may cause permanent damage to the lcd panel. note 2 hitachi recommends you to use disp.off function. display quality may deteriorate if you don?t use disp.off function. 8.4 power supply for lcm (example) note 1 : vr : 10k ? tdld tdld tch tch tdlcr tdlcf tdlcs tdlcs tldh tdor tdof tldh 0.8vdd 0.8vdd 0.8vdd 0.8vdd 0.2vdd 0.2vdd vdd signal disp.off gnd gnd vee gnd gnd lcm vdd vss vee 5.0v 22.0v v r v0 kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2708-SP14Q002-C1-9 page 8-3/3 sh. no. www.datasheet.co.kr datasheet pdf - http://www..net/
www.datasheet.co.kr datasheet pdf - http://www..net/
9.2 display pattern 9.3 interface pin connection fpc pitch 1.25mm 14 pins interface pin no. signal level function lcm cn1 1 d0 h/l display data 2 d1 3 d2 4 d3 5 disp.off h/l h : on / l : off 6 frame h first line marker 7 n.c - - 8 load h ? l data latch 9 cp h ? l data shift 10 vdd - power supply for logic 11 vss - gnd 12 vee - power supply for lc 13 v0 - operating voltage lc driving 14 vss - gnd interface pin no. signal level function 1 vcfl(+) - power supply for cfl 2 n.c - - 3 n.c - - lcm cn2 4 vcfl(-) - cfl gnd cfl i/f : j.a.e./ il ? g ? 4s ?s3c2 0.36 0.345 0.36 0.345 scale : nts unit : mm measurement tolerance : 0.1 115.185 (320 dots) 86.385 (240 dots) kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2709-SP14Q002-C1-9 page 9-2/2 sh. no. www.datasheet.co.kr datasheet pdf - http://www..net/
10. appearance standard 10.1 appearance inspection conditions visual inspection should be done under the following condition. (1) the inspection should be done under in the dark room. (2) the cfl should be lighted with the prescribed inverter. (3) the distance between eyes of an inspector and the lcd module is 25cm. (4) the viewing zone is shown the figure . 10.2 definition of each zone a zone : within the effective area specified at page 9-1/2 of this document. b zone : area between the window of metal frame and the effective area line specified at page 9-1/2 of this document. lcd bezel eye eye 25 25 window of metal frame effective area a zone b zone kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2710-SP14Q002-C1-9 page 10-1/3 sh. no. viewing angle Q 25 www.datasheet.co.kr datasheet pdf - http://www..net/
10.3 appearance specification *) if a problem occurs in respect to any of these items , both parties (customer and hitachi) will discuss in more detail. no. item criteria a b scratches distinguished one is not acceptable (to be judged by hitachi limit sample) ? - dent same as above ? - wrinkles in polarizer same as above ? - bubbles average diameter d(mm) maximum number acceptable d Q 0.2 ignore 0.2SP14Q002-C1-9 page 10-2/3 sh. no. www.datasheet.co.kr datasheet pdf - http://www..net/
no. item criteria a b width d(mm) length l(mm) maximum number acceptable minimum space w Q 0.25 l Q 1.2 2 20mm w Q 0.2 l Q 1.5 3 20mm w Q 0.15 l Q 2.0 3 20mm w Q 0.1 l Q 3.0 4 20mm contrast irregularity (line) (filamentous) total 6 - l c d rubbing scratch to be judged by hitachi standard - no. item criteria d Q 0.4 ignore dark spots, white spots foreign materials (spot) d>0.4 none w Q 0.2 l<2.5 Q 1 w Q 0.2 l>2.5 none foreign materials (line) w>0.2 none w Q 0.1 ignore 0.1SP14Q002-C1-9 page 10-3/3 sh. no. www.datasheet.co.kr datasheet pdf - http://www..net/
11. precaution in design 11.1 lc driving voltage ( vee) and viewing angle range setting vee out of the recommended condition will be a cause for a change of viewing angle range. 11.2 caution against static charge as this module contains c-mos lsis , it is not strong against electrostatic discharge. make certain that the operator?s body is connected to the ground through a list band etc. and don?t touch i/f pins directly. 11.3 power on sequence input signals should not be applied to lcd module before power supply voltage is applied and reaches to specified voltage (vdd). if above sequence is not kept, c-mos lsis of lcd modules may be damaged due to latch up phenomenon 11.4 packaging (1) no leaving product is preferable in the place of high humidity for a long period of time. for their storage in the place where temperature is 35 or higher, special care to prevent them from high hu midity is required. a combination of high temperature and high humidity may cause t hem polarization degradation as well as bubble generation and polarizer peel-off. pleas e keep the temperature and humidity within the specified range for use and storage. (2) since polarizers tend to be easily damaged, they should be handled full with care so as not to get them touched, pushed or rubbed. (3) as the adhesives used for adhering polarizers are made of organic substances which will be deteriorated by a chemical re action with such chemicals as acetone, toluene, ethanol and isopropyl-alcohol. the following solvents are recommended for use: normal hexane please contact us when it is necessary for you to use chemicals. (4) lightly wipe to clean the dirty surfac e with absorbent cotton waste or other soft material like chamois , soaked in the chemicals recommended without scrubbing it hardly. to prevent the display surface from damage and keep the appearance in good state, it is sufficient, in general, to wipe it with absorbent cotton. kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2711-SP14Q002-C1-9 page 11-1/3 sh. no. www.datasheet.co.kr datasheet pdf - http://www..net/
(5) immediately wipe off saliva or water drop attached on the display area because its long period adherence may cause deformation or faded color on the spot. (6) foggy dew deposited on the surface due to coldness will be caused for polarizer damage, stain and dirt on product. when necessary to take out the products from some place at low temperature for test, etc. it is required for them to be warmed up in a container once at the te mperature higher than that of room. (7) touching the display area and contact terminals with bare hands and contaminating them are prohibited, because the stai n on the display area and poor insulation between terminals are often caused by being touched by bare hands. ( some cosmetics are detrimental to polarizers.) (8) in general the quality of glass is fragile so that it tends to be cracked or chipped in handling, specially on its periphery. be careful not to give it sharp shock caused by dropping down, etc. 11.5 caution for opaeration (1) it is an indispensable condition to drive l cds within the specified voltage limit since the higher voltage than the limit causes the shorter lcd life. an electrochemical reaction due to direct current causes lcds undesirable deterioration , so that the use of direct current driver should be avoided. (2) response time will be extremely delayed at lower temperature than the operating temperature range and on the other hand at higher temperature lcds show dark blue color in them. however those phenomena do not mean malfunction or out of order with lcds which will come back in the specified operati ng temperature range. (3) if the display area is pushed hard duri ng operation, some font will be abnormally displayed but it resumes norma l condition after turning off once. (4) a slight dew depositing on terminals is a cause for electrochemical reaction resulting in terminal open circuit. usage under the relative condition of 40 50%rh or less is required. kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2711-SP14Q002-C1-9 page 11-2/3 sh. no. www.datasheet.co.kr datasheet pdf - http://www..net/
11.6 storage in case of storing for a long period of time (for instance , for years) for the purpose of replacement use , the following ways area recommended. (1) storage in a polyethylene bag with the opening sealed , so the fresh air will not be entered from outside . (2) placing in a dark place where neither exposur e to direct sunlight nor light is , keeping temperature in the range from 0 to 35 . (3) storing with no touch on polarizer surface by anything else. (it is recommended to store them as they have been contained in the inner container at the time of delivery from us.) 11.7 safety (1) it is recommendable to crash damaged or unnecessary lcds into pieces and wash off liquid crystal by either of solvents such as acetone and ethanol , which should be burned up later. (2) when any liquid leaked out of a damaged glass cell comes in contact with your hands , please wash it off well with soap and water. kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2711-SP14Q002-C1-9 page 11-3/3 sh. no. www.datasheet.co.kr datasheet pdf - http://www..net/
12. designation of lot mark 12.1 lot mark lot mark is consisted of 5 digits for production lot and 6 digits for production control. 12.2 serial no. serial no. is consisted of 6 digits number (000001~999999). 12.3 location of lot mark label is bring attached on the back side of module. 12.4 revision(rev.) control rev no. item mcount ic:mn73099hed(panasonic) transistor:2sa1036k(rohm) b mcount ic:it7001m(ite) transistor:2sa1576(rohm) week (day in calendar) figure in lot mark 1~ 7 1 8~14 2 15~21 3 22~28 4 29~31 5 month figure in lot mark month figure in lot mark jan. 01 jul. 07 feb. 02 aug. 08 mar. 03 sep. 09 apr. 04 oct. 10 may 05 nov. 11 jun. 06 dec. 12 year figure in lot mark 2009 9 2010 0 2011 1 2012 2 2013 3 1 4 0 8 year month week t digits for production control t : made in taiwan kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2712-SP14Q002-C1-9 page 12-1/1 sh. no. SP14Q002-C1 b www.datasheet.co.kr datasheet pdf - http://www..net/
13. precaution for use 13.1 a limit sample should be provided by the both parties on an occasion when the both parties agreed its necessity. judgment by a limit sample shall ta ke effect after the limit sample has been established and confirmed by the both parties. 13.2 on the following occasions, the handling of the problem should be decided through discussion and agreement between responsible persons of the both parties. (1) when a question is arisen in the specifications. (2) when a new problem is arisen which is not specified in this specifications. (3) when an inspection specifications change or operating condition change in customer is reported to hitachi, and some problem is arisen in this specification due to the change. (4) when a new problem is arisen at the customer?s operating set for sample evaluation in the customer site. the precaution that should be observed when handling lcm have been explained above. if any points are unclear or if you have any request , please contact hitachi. kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2713-SP14Q002-C1-9 page 13-1/1 sh. no. www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of SP14Q002-C1

	To Download SP14Q002-C1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .